manualshive.com logo in svg

Thermokon SRC-ADO 4AO 2DO, Operating Instruction

Share
Download
Thermokon SRC-ADO 4AO 2DO Operating Instruction Download Page 10

Software description SRC-ADO

Thermokon Sensortechnik GmbH

                              Page 9

2  Installation

2.1  Hardware Installation

For  detailed information  on installation and mounting,  please see  the  product  data  sheet
SRC-ADO.

2.2  Software Installation

For  the  installation  of  the  wireless  receiver  the  configuration  software  and  the  driver  are
needed. They are on the supplied CD. Please note, that administrator rights are required
on the PC for both the installation and the operation of the programmes.

2.2.1  Automatic Installation of Drivers

Install  the  configuration  software  SRC-ADO-BCS  and  follow  the  screen  instructions.
Software  and  driver  are  installed  automatically.  Connect  the  SRC-ADO  to  the  PC  by  an
USB cable. Follow the instructions. The SRC-ADO is ready for operation now and can be
configured via the software.

After an successful installation, the configuration software can be started via the
Start Menu\Programme\Thermokon.

Supported  operating  systems:  Windows9x;  WindowsNT;  WindowsMe;  Windows2000;
WindowsXP; WindowsServer

2.2.2  Manual Installation of Drivers

It  is  possible  to  install  the  drivers  manually  without  having  installed  the  configuration
software first. Connect the SRC-ADO to the PC by an USB cable. In the window “Assistant
for searching of new hardware“select “Install software from a list or a certain source“.

2.2.3  Logo-Test

Continue the Window-Logo test.

Picture 2: Windows-Logo Test

Summary of Contents for SRC-ADO 4AO 2DO
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands