![background image](http://html1.mh-extra.com/html/thermofisher-scientific/cryomed-tscm17ea/cryomed-tscm17ea_operating-and-maintenance-instructions-manual_1105580058.webp)
52 | PC Interface Software
Controlled Rate Freezer
•
“Edited” profile created date as edited date
•
“Printed” date and time of profile printout taken
•
“Data tag” entered in the profile
•
“Media and Sample type” values taken from the run
screen
•
Custom fields if added any
•
“Description” entered notes as description
•
Page numbers at bottom left corner of print document
•
“Thermo Scientific” logo at bottom right corner of print
document.
Page 2:
“Printed on” as header
Profile Data contains:
•
“---------------------” as sub header
•
Profile commands with numbering
•
“Alarm Listing” as header
•
“----------------------” as sub header
•
“Occurrence “Alarm Profile Time (min) as header
-
Alarms occurrence details with alarm type and time
of occurrence
•
Page numbers at bottom left corner of print document
•
“Thermo Scientific” logo at bottom right corner of print
document
Page 3 contains Profile Graph:
•
“Printed” date and time of profile printout taken as
Header
•
Current view of the profile run graph
•
Page number at bottom left corner of print document
•
“Thermo Scientific” logo at bottom right corner of print
document.
Alarms
When an alarm condition occurs, audible and visual alarms
are presented at the freezer, and an alarm window appears
on the PC screen. The window contains a list of up to three of
the most recent alarms and the message ‘Click Here To
Silence’ displays. Note that these pop-up windows may
appear behind the software screen if user is running multiple
programs at one time. Minimize software, and pop-up will
appear.
Figure 134. Click to Silence
Figure 135. Clear Alarm
Click anywhere on the alarm window to silence the audible
alarm at the freezer. After the audible alarm is silenced,
another alarm window appears showing the list of three most
recent alarms and the message ‘Click Here To Clear’. Click
anywhere on the alarm window to clear all alarms that have
been resolved. The alarm window reappears if any alarms are
still active.
If the message ‘Profile Stopped At Freezer’ displays, the run
has been stopped due to a component failure in the freezer or
when a user selects the Back button at the freezer during the
end run of the profile. Click the message to acknowledge that
the run has stopped. This action has the same effect as the
Stop button.
Alarm messages alert the user to the alarm status of the
freezer. The user must clear the message on the screen even
though the alarm condition may have already corrected itself.
Alarm messages may also appear before or during a run.
Alarm messages alternate if multiple alarms are present one
at a time.
Alarms are cleared with the Silence key. Graph shows
multiple tracking alarms once the occurred alarm has been
cleared.
The following are the alarm messages that could appear:
•
“
Temperature is High: Click OK to Silence
” message
appears when chamber temperature is greater than
programmed temperature by a pre-determined amount
(5°C).
•
“
Temperature is Low: Click OK to Silence
” message
appears when chamber temperature is less than
programmed temperature by a pre-determined amount
(5°C).
•
“
Chamber Sensor fail!
” message appears when
chamber temp >75.0°C.
•
“
Sample Sensor fail!
” message appears when sample
temp >75.0°C.