Thermo Scientific Vanquish VF-D20, Operating Manual, Page: 140 / 182

7 • Maintenance and Service
Page 140 Vanquish Charged Aerosol Detectors Operating Manual
7.11 Replacing the Doors
When
Damage of door
TIP The maintenance procedures do not require that you remove the
doors. If this should ever be required for a specific reason or procedure,
follow the related steps in this section.
Parts required
Replacement door
Follow these steps
NOTICE To avoid damage to the door hinges, be careful when
performing the following sequence of steps and do not apply force.
1. To remove a door, push the door upward while opening.
Open the door to a position in which the two hinges on the housing
are aligned in the grooves on the door. You can remove the door
only when the hinges are in the grooves.
Figure 37: Unhinging a door
2. Slightly tilt the door to the outside, away from the housing, and
remove the door.
3. To install the door, align the door with the hinges on the housing. Be
careful not to clamp tubing or capillaries between the door and the
enclosure.
No. Description
1 Hinge on the housing
2 Reception groove on
the door