Thermo Scientific
Chapter 2
|
Hardware setup
with the load cells in the locked position. A 24 mm (15/16 in.) open-end
wrench is recommended for unlocking the load cells on units with the
cart assembly. Units that are floor-mounted require the Mettler Toledo
™
load cell unlocking kit (not provided; Mettler Toledo part number:
30219938) and two small adjustable wrenches.
Refer to Figure 2.1 and the following steps to unlock the load cells for
mobile units (on the optional cart)
.
CAUTION:
Do not move the unit while the load cells are unlocked, as
this can damage the load cells.
HyPerforma Smartainer 3.0 User’s Guide
|
11
1. Unlock the tri-clamp and use an open-end wrench (not supplied) to
begin loosening the bolt.
2. Continue loosening the bolt until you see a gap between the bolt
and the load cell.
If the Smartainer 3.0 unit needs to be moved, the load cells must be
locked again before transport. Use the following steps to lock load
cells for mobile units.
Figure 2.1. Components of load cells for mobile units.
Tri-clamp
Bolt
Load cell
