Thermo Scientific Sorvall ST Plus Series, Instructions For Use Manual

Page: 12 / 172

xii
Preface
Symbols used on Unit and Accessories
Observe the information contained in the instructions for use to keep yourself and your environment safe.
General hazard Refer to instruction manual
Biological hazard Disconnect mains plug
Danger of cuts Direction of rotation
Make sure the rotor is installed
properly by lifting it slightly at
the handle.
Table iii: Symbols used on Unit and Accessories
Symbols used in the Instructions for Use
Observe the information contained in the instructions for use to keep yourself and your environment safe.
General hazard Electrical hazard
Biological hazard Danger of cuts
Hazard caused by flammable
materials
Indicates information consid-
ered important, but not
hazard-related.
Risk of crushing
Table iv: Symbols used in the Instructions for Use
Safety Instructions
WARNING
Not following these safety instructions can lead to hazardous situations that, if not
avoided, could result in death or serious injury.
Observe the safety instructions.
The centrifuge is to be used for its intended use only. Improper use can cause
damages, contamination, and injuries with fatal consequences.
The centrifuge must be operated by trained personnel only.
It is the obligation of the operator to make sure that the proper protective clothing
is used. Mind the “Laboratory Biosafety Manual” of the World Health Organization
(WHO) and the regulations in your country.
Keep a safety zone of minimum 30 cm around the centrifuge. Refer to
“Figure 1–1:
Safety Zone”. Persons and hazardous substances must be kept out of this safety zone
while centrifuging.
Do not modify the centrifuge and its accessories in any unauthorized way.
Do not operate a centrifuge if its housing is open or incomplete.
WARNING
Risk of damage due to incorrect power supply.
Make sure that the centrifuge is plugged only into a power outlet that has been
properly grounded.