17
Thermo Scientific Orion Star LogR™ Meter User Guide
Meter Setup
AUTO-READ
™
, Continuous or Timed Measurement Settings
• In the AUTO-READ mode, the meter starts taking
a measurement when
is pressed. Once the
measurement is stable, the display freezes and the data is
logged and printed. The AUTO-READ mode also controls
the stirrer. The stirrer starts when
is pressed and stops
when the measurement becomes stable.
• In the continuous mode, the meter is constantly taking measurements and
updating the display. Press
to log and print a measurement in this mode.
Note:
When running on battery power, this option will significantly decrease
battery life.
• In the timed mode, the meter is constantly taking measurements and updating
the display. The meter logs and prints the measurement at the selected time
interval.
1. In the measurement mode, press
.
2. Press
/
to scroll through the setup menu until
is displayed on
the top line.
3. Press
to accept the selection and move the arrow icon to the middle line.
4. If the timed measurement setting is active, press
/
to scroll through
for the measurement read type and
for the timed reading
interval.
5. Press
to accept the selection and move the arrow icon to the bottom line.
6. To scroll through a list of options on the bottom line, press
/
until the
desired option is displayed. To enter a numeric value for an option on the bottom
line, press
/
to adjust each digit and
to move to the next digit.
