Chapter 6: Operation
Thermo Scientific iEMS Incubator / Shaker HT User Manual Rev. 2.4, Cat. no. 1506400A
25
When you are inserting a thermal microplate holder into a slot, push the holder
completely in (Fig. 6.3) and then down (Fig. 6.4) to latch it into its normal
operating position.
Caution:
Do not place the microplate holder in or remove it from the instrument
while the instrument is shaking. This may damage the shaking
mechanism.
Fig. 6.3 Inserting the thermal microplate holder into a slot
Fig. 6.4 Pushing down the microplate holder to latch it properly
Note:
If the thermal microplate holder is not latched into position, it may lose
contact with the temperature controlling connectors at the rear of the
slot.
Summary of Contents for iEMS Incubator
