Chapter 5: Installation
Thermo Scientific iEMS Incubator / Shaker HT User Manual Rev. 2.4, Cat. no. 1506400A
14
5
Installation
5.1
Installation check list
The chapter on installation will contain an outline of the points mentioned in the
check list below.
Table 5.1 Installation check list
Tick
Item
Unpack the iEMS Incubator/Shaker HT instrument carefully. Refer to 5.2.1.
Keep the original packaging and packing material for future transportation.
Check the delivery for completeness. Refer to 5.2.2.
Check for damage during transport. Refer to 5.2.3.
Place the instrument on a normal laboratory bench, taking into account
both the climatic and technical prerequisites. Refer to 5.2.4 and 5.2.6. Leave
sufficient clearance on both sides and at the rear of the unit.
Install the instrument. Refer to 5.3.
Connect the mains supply cable to the mains input socket. Refer to 5.3.2.
5.2
What to do upon delivery
5.2.1
How to unpack
Move the unpacked instrument to its site of operation. Unpack the iEMS
Incubator/Shaker HT instrument and accessories carefully with the arrows on
the transport package pointing upwards. The following notes and instructions
are sent with the instrument and are immediately available when you open the
package:
•
Warranty Certificate card
•
packing instructions/packing list
•
transportation damage and discrepancy report
•
Manufacturing / Quality Report
•
iEMS Incubator/Shaker HT User Manual
Caution:
Do not touch or loosen any screws or parts other than those specially
designated in the instructions. Doing so might cause misalignment and
will invalidate the instrument warranty.
To lift the instrument, put your fingers under the bottom on both sides and lift it
with your back straight.
Caution:
When unpacking the instrument, it is recommended two people lift the
instrument together, taking proper precautions to avoid injury.
Retain the original packaging and packing material for future transportation. The
packaging is designed to assure safe transport and minimize transit damage.
Use of alternative packaging materials may invalidate the warranty. Also retain
all instrument-related documentation provided by the manufacturer for future
use.
Summary of Contents for iEMS Incubator
