Thermo Scientific iEMS Incubator, User Manual, Page: 36 / 66

Chapter 6: Operation
Thermo Scientific iEMS Incubator / Shaker HT User Manual Rev. 2.4, Cat. no. 1506400A 33
Operation Display
To pause shaking:
Press
shake
After pressing
shake ,
select the slot number by pressing number keys or by
scrolling with the
↵
key.
For example, press
1
Press
stop
To go on with shaking:
Press
start
and the program returns to the READY state.
Press
C
to return to the READY state if
you do not need to start a shake.
6.7 Verifying incubation and shaking parameters
You can display the parameters programmed for each slot. To display the
programmed parameters, press the appropriate slot number and then press
↵
(Enter). Continue to press
↵
to display the programmed parameters for
temperature, incubation time, shake time, interval time and shake speed.
Caution: You can only view programmed incubation and shaking parameters of a
slot while the slot is not heating or shaking. When you review the
parameters, ensure you do not make any unintentional changes to the
programmed values.
PLACE 1
900 rpm
00:00:20
PLACE NUMBER
PLACE 1
SHAKE PAUSED
READY 09:29:15