Chapter 5: Installation
Thermo Scientific iEMS Incubator / Shaker HT User Manual Rev. 2.4, Cat. no. 1506400A
13
4.4
Thermal microplate holder
1.
Detachable cover with heating element
2.
Thermal and sensor contacts
3.
Bottom with heating element
4.
Adjustment screws
5.
Handle
A1 Position of the A1 well on the microplate
Fig. 4.5 Thermal microplate holder
The thermal microplate holder is designed for holding the microplate during the
incubation process, ensuring accurate temperature control.
Note:
Adjust the screws (Fig. 4.5, item 4) with a screwdriver so that the
microplate is held firmly in place during shaking.
Warning:
Microplate holders will be hot when touched after use.
1
2
3
4
A1
5
Summary of Contents for iEMS Incubator
