4
Xcalibur Diagnostics for the PDA Detector
Controlling the Lamps from the Xcalibur Data System
Thermo Scientific
Accela PDA Detector Hardware Manual
37
The Lamp Start Up Time dialog box appears (see
Figure 29.
Lamp Startup Time dialog box
4. To change the time, click in the
Xcalibur should start the lamps at
box. Then use the
keyboard arrow keys, the number keys, or both to change the time.
5. Click
OK
to apply the new lamp startup time.
Use the Programmed Start option to pre-warm the lamps before starting a sequence of sample
analyses.
Tip
If you inadvertently click the
Xcalibur should start the lamps at
box more than
once to make a new entry, close the dialog box, and then reopen it. This time take
care to use only the keyboard arrow keys and number keys to enter a time value.
