3
Notice to the Installer
Installation of this oil-fired furnace
must
be performed by a qualified installer in
accordance with all local codes and authorities having jurisdiction. In the absence of
local governing codes, installation shall conform to these instructions and to the
regulations of the National Fire Protection Association’s Standard for the Installation of
Oil-Burning Equipment, NFPA 31-2020, and the National Electrical Code, ANSI/NFPA
70-2017, or the latest editions thereof.
A qualified installer
, also referred to in this instruction manual as a “qualified heating
contractor”,
is an individual, or agency, properly licensed and experienced to
install and service oil-burning equipment in accordance with all local codes and
ordinances.
Material and Workmanship
This furnace was built with the highest quality materials and attention to
workmanship. However, omissions and defects occasionally occur. Before
installing the furnace, inspect the furnace thoroughly. If missing parts, defective
material, or poor workmanship is evident, report the
model
and
serial numbers
imprinted on the furnace rating label to the seller for adjustment.
Packaging
A complete furnace is contained within a single package. The factory completed
all feasible assembly. However certain components including draft regulator and,
if supplied, door handle, air filter(s), and air filter rack(s), must be assembled to
the furnace, or the venting system, in the field. Refer to the assembly
instructions.
Shipping Damage
If this furnace was damaged during transit, please immediately request the
transportation company inspect the furnace and issue a
concealed damage
report
. The party receiving the furnace should file the claim for shipping damage.
Report any shipping damage immediately.
It is absolutely essential that a damage report be obtained. If a concealed
damage report is not obtained, we cannot provide assistance in recovering your
claim against the transportation company.
Warranties
c
WARNING: The manufacturer of this equipment assumes no liability for
any damages resulting from unauthorized modifications made to the
furnace, or any components thereof, or improper installation of the furnace
Summary of Contents for OD6FA072D48
