![background image](http://html1.mh-extra.com/html/thermo-king/tripac/tripac_operators-manual_1104341056.webp)
Maintenance Inspection Schedule
52
STRUCTURAL
•
•
•
Visually inspect unit for fluid leaks (coolant, oil, refrigerant).
•
•
•
Visually inspect unit for damaged, loose or broken parts.
•
•
Inspect, clean and (if necessary) replace evaporator air filter. It may
be necessary to check or replace it more often if conditions require it.
•
•
Inspect evaporator drain valves (kazoos) to ensure that they are in
place, in good condition and are sealing.
•
Steam clean condenser coil, APU pre-cooler coil. Do not bend over
coil fins.
•
Blow out evaporator coil and evaporator water drains with air. Do not
bend over coil fins.
•
Check APU mounting bolts and brackets for cracks. damage and
poor aligment.Verify tightness and torque to 100 ft/lbs (135.6 N•m) for
the claw mount, or 200 ft/lbs (271.2 N•m) for the direct frame mount.
Pre-Trip
500 Hrs
Annual
2,000 Hrs
Inspect/Service These Items
Summary of Contents for TriPac
