![background image](http://html1.mh-extra.com/html/thermo-king/tripac/tripac_operators-manual_1104341039.webp)
35
Optional Power Inverter
Inverter Operation Warnings
A 12 volt dc to 120 volt ac inverter is available as an option for
TriPac. The inverter is normally connected directly to the truck
batteries.
Inverter features will vary, depending upon the brand and
model used. Typically, when the inverter detects an AC load, it
automatically turns on and converts dc to ac to power onboard
120 volt ac devices. If the TriPac is enabled and the inverter
DANGER: Do not use an inverter in life support or
health care applications where a malfunction or
failure of the inverter could cause failure of a life
support device or medical equipment or significantly
alter the performance of that equipment.
DANGER: Potentially lethal voltages exist within the
inverter as long as the battery supply is connected.
During any service work, the battery supply should be
disconnected.
DANGER: Do not connect or disconnect batteries
while the inverter is operating from the battery
supply. Dangerous arcing may result.
CAUTION: Protect against possible electrical shock
hazards. If the inverter is operated in wet or damp
conditions a user-supplied, portable GFCI (ground
fault circuit interruptor) must be connected between
each inverter receptacle and the equipment it powers.
CAUTION: You may experience uneven performance
results if you connect a surge suppressor, line
conditioner or UPS system to the output of the
inverter.
Summary of Contents for TriPac
