![background image](http://html1.mh-extra.com/html/thermo-king/tripac/tripac_operators-manual_1104341029.webp)
TriPac HMI Controller Description and Operation
25
Down key is pressed continuously. The HMI
Controller setpoint temperature range is 50 to
90 degrees.
Fan Speed Key
The HMI Controller Fan Speed Key is used to
select the desired evaporator fan speed. When
the TriPac APU system is turned on, the fan
speed will default to the setting last used. High,
Medium and Low fan speeds are selected with
the Fan Key. Auto fan is currently not available.
APU System Key
The HMI Controller APU System Key is used
to enable the APU diesel power unit. The APU
must be ON to provide sleeper compartment air
conditioning, air circulation, truck battery
voltage sensing and engine coolant temperature
sensing. This key also allows access to the
diesel engine hourmeter reading. The APU
does not have to be On to operate the TriPac
sleeper compartment heater.
System Fault Indicator
This red indicator illuminates when an alarm
condition occurs and an alarm code is displayed.
Summary of Contents for TriPac
