![background image](http://html1.mh-extra.com/html/thermo-king/tripac/tripac_operators-manual_1104341025.webp)
21
Manual Pretrip Inspection
(Before Starting the TriPac Unit)
Pretrip inspections are an important part of a preventative
maintenance program designed to minimize operating
problems and breakdowns. Perform this pretrip inspection
before every trip.
NOTE: Pretrip inspections are not intended to take the place
of regular maintenance inspections.
Engine:
Check engine oil level. Check coolant level if
equipped with optional closed loop cooling. Coolant should be
visible in coolant tank sight glass.
Belts:
Make sure the TriPac APU belts are in good condition
and adjusted to the proper tension. For more information about
belt tension, see the Specifications chapter.
Electrical:
Check the electrical connections to make sure
they are securely fastened. Wires and terminals should be free
of corrosion, cracks, and moisture.
Structural:
Visually inspect the unit for leaks, loose or
broken parts, and other damage.
Coils:
Make sure the condenser, evaporator and pre-cooler
coils are clean and free of debris.
Heater:
Check exhaust pipe and intake tube.
General:
Listen for unusual noises and vibrations.
Summary of Contents for TriPac
