![background image](http://html1.mh-extra.com/html/thermo-king/tripac/tripac_operators-manual_1104341057.webp)
Maintenance Inspection Schedule
53
A/C SYSTEM
•
•
Check refrigerant level.
•
•
Check refrigerant lines for rubbing or damage.
HEATER
•
•
•
Start and run for at least 20 minutes each month.
•
•
•
Inspect combustion air intake tube and exhaust pipe for restrictions
or blockage.
•
•
•
Inspect the ducting, the air intake screen and air outlet for restrictions
or blockage.
•
Remove the glow pin and inspect for carbon build up. Clean.
•
Remove the glow pin screen and inspect for carbon build up.
Replace.
•
Change fuel pump screen.
Pre-Trip
500 Hrs
Annual
2,000 Hrs
Inspect/Service These Items
Summary of Contents for TriPac
