![background image](http://html1.mh-extra.com/html/thermo-king/tripac/tripac_operators-manual_1104341054.webp)
Maintenance Inspection Schedule
50
•
Maintain year-round anti-freeze protection at –30° F (-34° C).
Change coolant every two years, or with truck coolant. For units with
optional Closed Loop Cooling system and ELC (red) engine coolant,
change ELC coolant every 5 years or 12,000 hours.
•
Adjust engine valves.
- - -
Test fuel injection nozzles at least every 3,000 hours. (Based on EPA
40 CFR Part 89.)
ENGINE OIL CHANGE INTERVALS
(Change oil and filters hot)
1,000
Hour
Intervals
1,000 Hour Interval
- Oil change interval is every 1,000 hours of
operation only when using a Thermo King brand oil filter and CI-4 or
better oil. Units with optional DPF require CJ-4 or better oil.
•
500 Hour
Intervals
500 Hour Interval
- Oil change interval is every 500 hours of
operation when using any other brand oil filter and CI-4 or better oil.
Units with optional DPF require CJ-4 or better oil.
IMPORTANT: Fill the crankcase slowly so oil will not run into the
breather, thus filling up a cylinder with an open valve. Leaving the
dipstick out while adding oil will ventilate the crankcase.
Pre-Trip
500 Hrs
Annual
2,000 Hrs
Inspect/Service These Items
Summary of Contents for TriPac
