Thermo King SGCO 3000, Manual

Page: 77 / 144

Operating Instructions
77
Figure 38: Example of SG+ Log
Event Log Report
Container ID: APZJ007063 LogView: 5.9.2.0 SGPlus2LogView.dll: Rev. : 1.1.1.9
Thermo King SG+ Event Log
Time for transfer : 080826 16:13
Retriever ID : LogMan II PC v. 2.0.2
SG+ software version : 080423 revision 00
SG+ boot loader version : 040108
Thermo King SG+ Event Log
DATE TIME DATA
2008/07/21 20:28 POWER..........: Power ON
2008/07/23 14:26 ENGINE.........: Engine running
2008/07/23 15:26 SPEED..........: High to low speed
2008/07/23 16:12 SPEED..........: Low to high speed
Compressor start detected
2008/07/23 21:51 POWER..........: Power OFF
2008/07/23 21:51 POWER..........: Power ON
2008/07/24 20:43 ENGINE.........: Engine running
2008/07/25 13:18 FUEL..............: Change in level: 7 Ga
2008/08/10 18:39 SYSTEM.........: Flash load completed
Old: 000000 00 New: 080423 00
2008/08/10 18:39 POWER..........: Power ON
2008/08/10 18:39 CONFIGURATION..: Clock set
2008/08/12 14:06 SPEED..........: High to low speed - was 1849 rpm
2008/08/12 15:13 SPEED..........: Low to high speed - was 1505 rpm
2008/08/16 14:30 SPEED..........: Low to high speed - water temperature too high
Water temperature 102.6 C
2008/08/16 14:31 MESSAGE........: Water temperature sensor failure (#113)
2008/08/20 15:18 SPEED..........: Low to high speed - was 1538 rpm
Compressor start detected
2008/08/21 04:18 FUEL...........: Positive change from 41.3 to 54.3 Ga
Change in level: +13.0 Ga
2008/08/24 05:18 FUEL...........: Negative change from 54.2 to 35.2 Ga
Change in level: -19.0 Ga
2008/08/26 16:13 LOG RETRIEVED..: Log retrieved
Latest DLL file revision
Old fuel event description
prior to 080423 software
Software update
New fuel event description
ARA1663