![background image](http://html1.mh-extra.com/html/thermo-king/kd-ii-sr/kd-ii-sr_manual_1104410015.webp)
1
Specifications
ENGINE SPECIFICATIONS
Engine
TK 3.74
Fuel Type
No. 2 Diesel fuel under normal conditions
Oil Capacity: Crankcase & Oil Filter
w/Bypass Oil Filter
9 qt (8.6 liters)
10 qt (9.6 liters)
Fill to full mark on dipstick
Oil Type
API Type CF-4, CG-4 or better
API Synthetic Type CF-4, CG-4 or better after first
500 hours
Oil Viscosity*
Multi-grade Oil Ambient Temperature F (C)
SAE 5W-30
-22 to +86 F (-30 to +30 C)
SAE 10W-30
-4 to +86 F (-20 to +30 C)
SAE 10W-40
-4 to +104 F (-20 to +40 C)
SAE 15W
+ 5 F to +140 F (-15 to +40 C)
Engine rpm: Low Speed Operation
High Speed Operation
1625 ± 25 rpm
2425 ± 25 rpm
Engine Oil Pressure
35 to 60 psig (241 to 414 kPa)
Intake Valve Clearance
0.0079 in. (0.20 mm)
Exhaust Valve Clearance
0.0079 in. (0.20 mm)
Valve Setting Temperature
Room temperature
Timing Injection Pump
14° BTDC
Injection Nozzle Pressure
1706 psig (11720 kPa)
Low Oil Pressure Sensor
10 ± 3 psig (69 ± 21 kPa)—shutdown
High Coolant Temperature Sensor
220 ± 5.0 F (104.4 ± 2.8 C)—shutdown
Engine Thermostat
180 to 190 F (82.2 to 87.8 C)
Coolant System Capacity
4 quarts (3.81 liters) with overflow tank
Radiator Cap Pressure
10 psig (69 kPa)
Drive
Belts to compressor, fans, 12 V alternator, water
pump and electric motor (jackshaft)
* Multi-viscosity weight oil with the recommended API classification may be used based on the ambient
temperature. The above recommendations are written for mineral oil based lubricants.
R-134a REFRIGERATION SYSTEM
Compressor Model
X214
Refrigerant Charge
8 lb. 5 oz. (3.77 kg) R-134a
Compressor Oil Charge
66 oz. (1.95 liters)*
Compressor Oil Type: R-134a (Solest 35)
TK No. 203-413 (Ester base) required
Suction Pressure Regulator Setting
Special Setting KD-II Single Phase
18 psig (124 kPa)
18 psig (124 kPa)
Heat/Defrost Method:Engine Operation
Electric Operation
Hot gas
Hot gas and electric heater strips (Model 50)
High Pressure Cutout
325 +25/-0 psig (2088 + 172/0 kPa)
Automatically reset @ 200 ± 20 psig
(1379 ± 138 kPa)
Summary of Contents for KD-II SR
