![background image](http://html1.mh-extra.com/html/thermo-king/b-100-10/b-100-10_installation-manual_1104408036.webp)
36
Installing the In-Cab Control
1. Install the mounting bracket for the in-cab control box. Its design
allows the mounting bracket to be positioned in various places in the
cab interior. Find
a location which is accessible and visible from the
driver’s seat
, and which does not restrict the mobility or visibility of
either the driver or the vehicle’s instruments and levers.
2. Depending on the location chosen, the base should be mounted
following either Option
A
or Option
B
.
3. Mount the base of the mounting bracket in the chosen location. Use
screws (
C
), rubber mat (
D
) and metal plate (
E
), which are supplied by
Thermo King, as indicated in the drawing.
4. When placing the in-cab control box on the bracket, rest the in-cab
control box on the arm (
F
), and slide it to the right until the arm tab is
properly fitted to the in-cab control box frame.
5. The tilt of the in-cab control box’s front face may be altered by
loosening screw
G
.
6. Connect the data cable to connector
H
.
7. To remove the in-cab control box from the bracket, press the tab (
I
) and
slide to the left.
Summary of Contents for B-100-10
