Thermo King B-100-10, Installation Manual

Page: 16 / 64

16
Installing the Condenser Unit (front-mounted)
1. Fit the template according to the instructions given.
2. Mark the position of the drilled holes and openings. Avoid any possible
interference with electrical wires and parts of the vehicle chassis.
3. Drill the holes to hold the condenser unit in place (D 12) and the holes
for routing hoses (D 70).
4. Disassemble the canalizer.
5. Disassemble the electric box support plate on the unit,
by removing the two nuts, 1 , securing the plate to the unit chassis.
6. Disassemble the canalizer support bracket plate by removing the two
hold-down bracket screws, 2 , from the unit chassis.