Thermo King B-100-10, Installation Manual

Page: 22 / 64

22
Preparing Refrigeration Hoses
Speedy Clip System
1. Cut the hose to the required length. Use the recommended hose cutters.
Do not use saws, knives or similar tools.
2. Pass two clips of appropriate diameter over the hose.
3. Lubricate the cylinder of the fitting to be inserted in the hose, using
Thermo King refrigerant oil.
4. Manually insert the fitting into the hose. The hose should touch the
projecting part of the fitting without going into it. Clean off excess oil.
5. Place the clamp for the clips into the fitting slot. The clamp is properly
positioned when it can rotate within the slot.
6. Place the clips in the clamp arm seats.
7. Close both clips using recommended pincers. Check that the clips are
properly positioned and closed (see drawings).