Thermo King B-100-10, Installation Manual

Page: 14 / 64

14
Installing the Condenser Unit (roof-mounted)
1. Fasten two strong straps attached to a crane to the unit. Lift the unit,
making sure that it remains in a horizontal position. If it does not,
change the position of the straps.
2. Place the unit on the roof of the vehicle. Remove the straps and the
crane.
3. Pass the 4 locks crews through the holes in the frame, placing a flat
washer onto each screw. Avoid direct contact between the unit and
the body by using rubber rings.
4. Fit the unit by attaching a nut and a washer onto each screw.
5. Reassemble the electrical box and canalizer support brackets.
6. Pass the hoses through the corresponding hole in the frame.