Thermo King 914 724, Manual

Page: 78 / 111

Compressor and Clutch Maintenance (Rev. 1/99)
68
3. Remove the snap ring using external snap ring pliers
(TK 204-808).
4. Remove the cover.
Remove Snap Ring and Cover
5. Remove the pulley assembly using the clutch remover
(TK No. 204-806) and the spacer positioned on the
cylinder head hub.
1. Snap Ring
2. Cover
NOTE: To avoid damaging the pulley groove, the
pulley claws should be hooked into (NOT UNDER)
the pulley groove.
Remove Pulley
6. Remove the coil’s lead wire from the holder on the top
of the compressor.
7. Remove the three screws that attach the coil to the com-
pressor and remove the coil.