Compressor and Clutch Maintenance (Rev. 1/99)
72
3.
Use the seal remover (from the shaft seal kit P/N
204-805) to remove the shaft seal cover. Turn the seal
remover to engage the hook on the seal remover with
the hook on the shaft seal cover, then slowly pull the
shaft seal cover out of the cylinder head.
NOTE: The shaft seal cover SHOULD NOT be
reused. Always use a new shaft seal cover when reas-
sembling a compressor.
Remove Shaft Seal Cover
4.
Use the seal remover (from the shaft seal kit P/N
204-805) to remove the shaft seal. Turn the seal
remover to engage the hook on the seal remover with
the hook on the shaft seal, then slowly pull the shaft
seal out of the cylinder head.
1.
Shaft Seal Cover
2.
Felt Pad
Remove Shaft Seal
Inspection
The shaft seal should not be reused. Always use a new shaft
seal when reassembling a compressor. Be extremely careful
to make sure the lip of the shaft seal that is being installed is
not scratched or damaged in any way. Make sure the shaft
seal is free from lint and dirt that could damage the shaft
seal surface.
Inspect Shaft Seal
1.
Shaft Seal
Summary of Contents for 914 724
