background image

Phone: (800) 435-

ALAN

 (2526) 

Fax: (877) 333-

ALAN

 (2526) 

Email: [email protected] 

www.

ALAN

mfg

.com

Wireless Thermostat

Installation Instructions

Made in USA

Model T200WL01

 

 

 

 

Applications

 

Automatic control of airflow based on
temperature setpoint.

Features

Set the temperature best suited for 
your comfort and the thermostat will 
adjust the airflow to insure the space 
is not overcooled or overheated.

 

Over-conditioned airflow is automatically 
redirected to spaces that need it.

 

Use the Nighttime feature to 
automatically reduce airflow at night.

 

Automatically lower airflow on days 
the facility is closed.

 

Manual or 7-day programmable 
operation.

 

Battery operated.  Requires no wiring.

 

Large, backlit LCD display.

 

 

Operation

 

 

Sensor

 

Dampers 

Airflow Control 

Zones 

Addresses 

Schedule Mode

 

Hold Mode

System Modes

 

LCD Backlight

Wireless Control

Automatically controls airflow based on temperature 
setting, space temperature and supply air temperature.

 

Temperature sensor at the WCD damper senses heating or cooling calls. 

WCD Dampers / A80-WL Wireless Actuator

100% to 0% or minimum airflow set by mechanical stop on the actuator.

1 zone can control up to 32 different dampers.

32 different addresses for different departments, groups or floors. 

Programmable start and stop times for daytime operation using
automatic airflow control based on temperature setting.

Automatic airflow control based on temperature setting 24/7. 

Off or Auto. In Auto, airflow is controlled by temperature setting.
In Off, the airflow is reduced to the preset Off level.

The LCD backlight is turned on whenever a key is pressed. 

Uses 915MHz ISM band with proprietary protocol.

Indoorrangeisover100feet. 

Battery Powered

Dimensions

Uses two AA batteries.

5.00 x 4.50 x 1.00 inches (LWD)

 

 

Summary of Contents for T200WL01

Page 1: ...le Mode Hold Mode System Modes LCD Backlight Wireless Control Automatically controls airflow based on temperature setting space temperature and supply air temperature Temperature sensor at the WCD damper senses heating or cooling calls WCD Dampers A80 WL Wireless Actuator 100 to 0 or minimum airflow set by mechanical stop on the actuator 1 zone can control up to 32 different dampers 32 different a...

Page 2: ...n Off position that can shut the airflow down when the office or space is not being used and provide even greater energy savings The night setback feature works the same way and provides added energy savings Improved Comfort The WCD Damper actuator has a Close position limit that can be used to insure a minimum airflow even when the thermostat tries to fully close the damper The minimum Close posi...

Page 3: ... be set from 1 to 32 Press the Next key to advance to the next option Press the Enter key if no more options are to be changed Or press the Cancel key to exit the option sequence and return to normal operation Option Zone CANCEL NEXT ENTER Option 01 Setting Zone Number Default 01 601 The Home address is used to distinguish between installations that are less than 500 feet away This allows neighbor...

Page 4: ...user can set Use the Next key to select Option 07 Use the Up and Down keys to set the High Setpoint Limit The limit can be set from 60 to 90 degrees Set High Setpoint Limit Default 80 Degrees 607 Option CANCEL NEXT ENTER The Low Setpoint Limit is the lowest setpoint temperature the user can set Set Low Setpoint Limit Default 65 Degrees 608 Option Zone Home CANCEL NEXT ENTER Use the Next key to sel...

Reviews: