Cortina S manuel Ver.01
18
User Menu - Settings
Fuel or Recipe Selection
Through a long pushing of the button
P1
is changed the type of receipe.
The display D4 shows the selected recipe (I=Recipe 1; II= Recipe 2)
Ignition/Exstinguishing
The Ignition and Extinguishing are activated with a long pushing of the button
P2
The Ignition is signalled by the first blinking than fix led
L1
The Work state is signalled by the fix led
L4
The Modulation state is signalled by the blinking
L4
The Extinguishing is signalled by the blinking led
L3
The Extinguishing finished = OFF state is signalled by the fix led
L3
Combustion Power Setting
Click button
P4:
the display
D1
blinks
Trough the click of the buttons
P4 (
increasing)or
P3
(decreasing) the power is changed
according to the values available
Ex.
: 1 – 2 – 3 – 4 – 5 – A
(
A
= Automatic Combustion)
After 5 seconds the new value is memorised and the display shows as normal
Work Thermostat Setting
Click button
P3:
the display
D2
blinks
Trough the click of the buttons
P4
(increasing)or
P3
(decreasing) the value of the thermostat
is changed.
After 5 seconds the new value is memorised and the display shows as normal
Manual Pellet Loading
The long pressure of button
P4
activates the Pellet Manual Loading with activation of Auger
in continuous way.
The bottom display shows
LoAd
and the upper display shows the elapsed loading time. To
stop the loading push any button. The loading stops automatically after 300 seconds
Pellet Loading Correction
The activation is with a long pushing of the button
P3
The bottom display shows
PELL,
the upper display shows the blinking value
With buttons
P3 / P4
the blinking value increases or decreases
The values are between the range
– 7 ÷ 7
.The default value is ‘
0
’
After 5 seconds the new value is memorised and the display shows as normal
Display
With a click sequence of
P1
tP
= Buffer Probe Temperature (if present)
UF
= Combustion Fan Speed [RPM/Volt]
tF=
Exhaust temperature [°C]
bA3
+ Product Code
00.00