Thermal Arc POWERMASTER 400SP, Service Manual

Page: 40 / 110

4-6 Octobe r 30, 2008
POWERMASTER 400SP, 500SP AUTOMATION
A. Secondary Parameters (Menu Main
Level)
Art # A-07866
With and (51) push-buttons you can switch to
the seconda r y pa r amete r s. The cu rr ently selected
pa r amete r is indicated in the display (50) . The Gas
P r e Flow [0.1] value is p r e-loaded at the Facto r y but
the use r has inc r eased it to 0.4s using (48) push-
button.
Push-button (44) (-) is used to r educe the indicated
pa r amete r and push-button (48) (+) is used to
inc r ease the value of the indicated pa r amete r . P r essing
the push-button (46) (END) saves the pa r amete r and
the system switches back to the mate r ial-wi r e-gas
combination display.
B. Extras menu
In addition to the seconda r y pa r amete r s, the Ext r as
menu item is also available; it offe r s the following
functions:
Push-buttons (44) (-) and (48) (+) a r e used to switch
between the menu items. The diffe r ent ent r ies of the
menu items a r e called up by p r essing the and
push-buttons (51) at the same time. Switching
between the individual ent r ies is also possible he r e
with the push-buttons (44) (-) and (48) (+). To r etu r n,
p r ess push-button (46) (END).
C. Tiptronic
The Tipt r onic function p r ovides you with 100
independent jobs (10 job set with 10 jobs each). A
job sto
r es all the settings and co rr ections on the
ope r ating panel.
The best way to use the Tipt r onic function is to assign
job numbe r s to f r equently r ecu rr ing welding tasks o r
save the settings which individual welde r s use
specifically fo r “thei r ” jobs.
1. Save/P r og r amming jobs:
a. Dete r mine the optimal welding values.
b. P r ess the “TT Save” button (45) (Save LED
flashes).
c. Select the ta r get job numbe r with the push-
buttons (44) (-) and (48) (+) o r with the sma r t
to r ch r ocke r , and confi r m with the “TT Ente r ”
push-button (47) (if you do not p r ess Ente r ,
the Save LED goes out afte r 10 seconds afte r
the last keyst r oke and the save ope r ation is
abo r ted).
d. The Save and Ente r LEDs flash b r iefly to
confi r m that p r og r amming is te r minated.
2. Selecting jobs:
a. Switch the Tipt r onic function on by p r essing
“Tipt r onic” (49) (associated LED comes on).
b. Select the job numbe r with the sma r t to r ch
r ocke r (alte r natively the job numbe r can be
selected with the push-buttons (44) (-) and
(48) (+)).
c. To exit the Tipt r onic p r ocess, p r ess
“Tipt r onic” (49) (Tipt r onic LED goes out). The
pa r amete r s a r e r eset to the values that existed
befo r e you switched on the Tipt r onic p r ocess.
3. Setting a job inactive:
a. Switch the Tipt r onic function on by p r essing
“Tipt r onic” (49) (associated LED comes on).
b. Select job numbe r with the sma r t to r ch
r ocke r (61) o r with the push-buttons (44) (-)
and (48) (+) (an active job is indicated in the
sma r t to r ch display (60) and in digital
multifunction display (54) with a decimal point
between the job set and the job numbe r ).
c. Hold the Ente r push-button (47) p r essed
fo r two seconds (the decimal point in the sma r t
to r ch display 60 and in the digital display (54)
goes out).
4. Setting a job active:
a. Switch the Tipt r onic function on by p r essing
“Tipt r onic” (49) (associated LED comes on).
b. Select the job numbe r with the push-buttons
(44) (-) and (48) (+) (with an inactive job, the
decimal point between job set and job numbe r
is missing).