Theratherm 09i, User And Service Manual

Page: 21 / 47

19 A Division of:
6.2.5
Symbol of heating, the light will be on when it is in operation.
When defrosting, the light will flash.
6.2.6
Symbol of cooling, the light will be on when it is in operation.
Note: When parameter P1 is on checking/adjusting, will be flashing at the
same time.
When there is on Automatic mode, will be lighting at the same time.
Note: When parameter P6 is on checking/adjusting, Symbol of automatic stop light
will flash.
6.2.8
Symbol of automatic start, the light will be on when it is in operation.
Note: When parameter P5 is on checking/adjusting, Symbol of automatic start light
will flash.
6.2.9 6.2.10
Press this button, the light will flash,
the heat pump will operate in ‘Full output’ only.
While you choose the Smart , the heat pump will just o perate in ‘Small output’ , ‘Medium output’ and ‘Full
output’
When in ‘Small output’, the lamp of Smart is lighting, the light of silent will flash.
When in ‘Medium output’, the light of Smart will flash.
When in ‘Full output’, the lamp of Smart is lighting , the lamp of Powerful will be flash.
6.2.11
While you choose the Silent , the heat pump will just operate in ‘Medium output’ and ‘Small output’
When in ‘Small output’, the light of Silent will flash.
When in ‘Medium output’, the lamp of Silent is lighti ng, the lamp of Smart will be flash.
and
and