Theratherm 09i, User And Service Manual

Page: 3 / 47

1 A Division of:
Swimming Pool Heat Pump
User and Service Manual
INDEX
1. Specifications
2. Dimensions
3. Installation and connection
4. Accessories
5. Electrical wiring
6. Display controller operation
7. Troubleshooting
8. Exploded diagram
9. Maintenance
10. Warranty
11. Wifi instruction
Thank you for using Theratherm swimming pool heat pump for your pool heating, it will heat your pool water and keep
the constant temperature when the air ambient temperature is at -12 to 43
℃
ATTENTION: This manual includes all the necessary information with the use and the installation of your heat
pump.
The installer must read the manual and at follow the instructions in implementation and maintenance. The installer
is responsible for the installation of the product and should follow all the instructions of the manufacturer and the
regulations in application. Incorrect installation against the manual implies the exclusion of the entire guarantee.
The manufacturer declines any responsibility for the damage caused by an incorrect installation that do not follow the
manual guidelines.
WARNING:
1. Please always keep the heat pump in a well ventilated place and away from anything which could cause fire.
2. Don’t weld the pipe if th ere is refrigerant inside the unit. Please keep the heat pump out of a confined space when
re-gassing.
3. Please always empty the water out of the heat pump during winter time, or when the ambient temperature drops
below 0
℃
. Or the Titanium exchanger will be damaged because of being frozen, in such case, your warranty will be
lost.
4. Please always cut the power supply if you want to open the cabinet to reach inside the heat pump, because there
is high voltage electricity inside.
5. Please keep the display controller in a dry area, or close to the insulation cover, to protect the display controller
from being damaged by humidity.