Theratherm 09i, User And Service Manual

Page: 12 / 47

10 A Division of:
Water Inlet & outlet junction
1. Remove black union nut from the
Theratherm anti clockwise and
remove plastic cover.
2. Check o ring is in place as per picture.
3. Insert black union between o ring and
union nut.
4. Screw union nut clockwise until hand
tight.
Cable wiring
1. To be connected by a licenced
Electrician
2. 1&2 port is (dry contact) for heat
demand. Max 5V
Dry contact timer connection:
Supplied and installed by an licenced Electrician.
Non-contact Timer system
Set timer to the times devised, example (9am-5pm) but circulation pump will not activate unless contact closed
within the hours by Theratherm Inverter. (Timer to be supplied by Electrician)