Theratherm 09i, User And Service Manual

Page: 20 / 47

18 A Division of:
d10 Current fan speed
0-1200
（
rpm
）
Real testing value
d11 Error code for last time All error code
Pressto check the “ User parameter from P0 to P7.
If needed, press second, then press to adjust the current parameter.
first, then press to enter parameter P7 checking, and press second, then press
to adjust the parameter P7 Inlet water temp. Correction from -9 to 9.)
Code Name Scope Default Remark
P0 Manual defrost 0-1 0 1 Manual defrosting mode, 0 Normal mode
P1 Working mode 0-1 1
1 Heating mode
，
0 cooling mode
P2 Timer on/off 0-1 0
1 Timer on/off is under function
，
0 Timer on/off is out of
function (The setting of P4 and P5 won’t work)
P3 Water pump 0-1 0 1 Always running
，
0 Depends on the running of compressor
P4 Current time HH:MM 00
：
00 0-23:0-59
P5 Timer on HH:MM 00
：
00 0-23:0-59
P6 Timer off HH:MM 00
：
00 0-23:0-59
P7
Inlet water temp.
correction
-9
～
9 0 Default setting: 0
NOTE: Under defrosting mode, P0=1.
After defrosting finished, it will be automatic enter Normal mode, P0=0.
6.2.4 System reset function
Press in 10s, the system will reset and display “0000” on the controller.
or
and
first, then press
( F or example: Press
or