Themis RES-12XR3-S Installation Manual Download Page 25

Page: 25 / 138

Preface

xxiii

Themis Computer

tered DIMM memory modules. The RES-12XR3-S for X8DAL-3/i is based on the
functionality and capability of the following Intel chipset:

• Intel 5500 (Tylersburg) chipset

• IOH-24D

An overview of RES-12XR3-S for X8DAL-3/i design and specifications is given in
Chapter 1, "Overview and Specifications", of this manual.

This manual is intended for an experienced system administrator with a knowledge
of both networking and high-speed server systems.

Website Information

Themis Computer corporate and product information may be accessed on the World
Wide Web by browsing the website

http://www.themis.com

Your Comments are Welcome

We are interested in improving our documentation and welcome your comments and
suggestions. You can email your comments to us at

[email protected]

Please include the document part number in the subject line of your email.

Notes, Cautions, Warnings, and Sidebars

The following icons and formatted text are included in this document for the reasons
described:

Note:

A note provides additional information concerning the procedure or action

being described.

Summary of Contents for RES-12XR3-S











































































































































Search results

Summary of Contents for RES-12XR3-S

Reviews:

Related manuals for RES-12XR3-S

Brands by name

Popular brands

Themis RES-12XR3-S, Installation Manual

Search results

Summary of Contents for RES-12XR3-S

Reviews:

Related manuals for RES-12XR3-S

Brands by name

Popular brands