Themis RES-12XR3-S Installation Manual Download Page 88

Page: 88 / 138

3-24

Themis Computer

RES-12XR3-S for X8DAL-3/i Installation Manual

Version 1.0

3.4

Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set first.

3.4.1

Supervisor Password

This item indicates if a Supervisor password has been entered for the system. “Not
Installed” means a Supervisor password has not been used.

3.4.2

User Password

This item indicates if a user password has been entered for the system. “Not
Installed” means that a user password has not been used.

3.4.3

Change Supervisor Password

Select this feature and press <Enter> to access the submenu, and then type in a new

Figure 3-3.

Security Settings

Summary of Contents for RES-12XR3-S











































































































































Search results

Summary of Contents for RES-12XR3-S

Reviews:

Related manuals for RES-12XR3-S

Brands by name

Popular brands

Themis RES-12XR3-S, Installation Manual

Search results

Summary of Contents for RES-12XR3-S

Reviews:

Related manuals for RES-12XR3-S

Brands by name

Popular brands