Themis RES-12XR3-S, Installation Manual

Page: 52 / 138

RES-12XR3-S for X8DAL-3/i Installation Manual Version 1.0
2-8
Themis Computer
2.1.3 PCI Cards
Since the RES-12XR3-S for X8DAL-3/i is only 1RU (1.75”) high, the PCI sockets
occupy all the space available for PCI cards, therefore no room exists for PCI expan-
sion card capability for this unit, nor is there a riser card which is suitable.
2.1.4 Lithium Battery
2.1.4.1 Removing the Lithium Battery
Perform the following steps to remove the lithium battery:
1. Make sure the system is powered off (see “Operation” on page 2-17).
2. Locate the lithium battery socket and squeeze the latch (see A , Figure 2-6 on
page 2-9) together until the battery lifts out of its socket.
Figure 2-5.
The RES-12XR3-S for X8DAL-3/i Lithium Battery
Lithium
Battery