Themis RES-12XR3-S Installation Manual Download Page 107

Page: 107 / 138

Themis Computer

Rack-Mount Slide Installation

B-3

Figure B-2.

RES-12XR3-S for X8DAL-3/i Rack-Mount Slide Installation

Front

Attach the front (short) slide bracket
to the outside slide section with screws,

Outside slide section

washers, and nuts (included in slide kit)

Attach the rear (long) slide bracket
to the outside slide section with screws,
washers, and nuts (included in slide kit)

Attach both inside slide sections to the left and right sides of
the RES-12XR3-S chassis with #8-32 screws (included in slide kit)

Note:

Graphic shown above is for slide placement only; chassis shown is not an accurate representation of the RES-12XR3-S.

Summary of Contents for RES-12XR3-S











































































































































Search results

Summary of Contents for RES-12XR3-S

Reviews:

Related manuals for RES-12XR3-S

Brands by name

Popular brands

Themis RES-12XR3-S, Installation Manual

Search results

Summary of Contents for RES-12XR3-S

Reviews:

Related manuals for RES-12XR3-S

Brands by name

Popular brands