Thecus N4310 Series User Manual Download Page 49

Page: 49 / 131

Chapter 3: System Administration

iSCSI

3.4.5

You may specify the space allocated for iSCSI. See the table below to the allowed iSCSI target num-

See the table below to the allowed iSCSI target num-

iSCSI target num-

num-

ber per system:

Model

N4310

Allowed iSCSI volume

iSCSI Target

•

To add iSCSI target volume, click iSCSI with associated RAID volume from its drop down list and
select the desired RAID volume.

iSCSI Target

Item

Description

Add

Click to allocate space to iSCSI target from associated RAID volume.

Modify

Click this to modify the iSCSI Target.

Advanced

There are 3 options (iSCSI CRC/Checksum, Max Connections, Error Recovery Level) These currently
allow the Admin to Enable/Disable the Thecus IP storage associated with the iSCSI setting.

Delete

Click this to delete the iSCSI Target.

Allocating Space for iSCSI Volume

To allocate space for an iSCSI target on the current RAID volume, follow the steps below:

Under the iSCSI Target List, select iSCSI Target then click Add.

Summary of Contents for N4310 Series




































































































































Search results

Summary of Contents for N4310 Series

Reviews:

Related manuals for N4310 Series

Brands by name

Popular brands

Thecus N4310 Series, User Manual

Search results

Summary of Contents for N4310 Series

Reviews:

Related manuals for N4310 Series

Brands by name

Popular brands