27
Chapter 3: System Administration
UI Login Function
3.3.17
Adjusts UI Login Configuration settings, you can enable/disable the Web Disk, Photo Server and
modules functions, according to your needs.
Networking
3.3.18
From the System Management category, choose Networking, and the Networking Configuration
screen appears. This screen displays the network parameters of the global setting and available
network connection. You may change any of these items and press Apply to confirm your settings.
See a description of each item in the following table:
Network Configuration (Global parameter)
Item
Description
Host name
Host name that identifies the Thecus IP storage on the network.
Domain name
Specifies the domain name of Thecus IP storage.
WINS Server
To set a server name for
NetBIOS
computer.
DNS Mode
Select the DNS server is coming from DHCP server or manual input. A total of 3 DNS
servers can be input. If the DNS setting is chosen from DHCP server, then it will refer to
WAN/LAN1 port.
DNS Server 1,2,3
Domain Name Service (DNS) server IP address.
Network Configuration (NIC port)
Link speed
Display associated NIC port link speed.
Link status
Display associated NIC port link status.
MAC address
MAC address of the network interface.
Jumbo Frame Support
Enable or disable Jumbo Frame Support of associate interface on your Thecus IP storage.
IPv4/IPv6
Click to enable IPv4/IPv6 for TCP/IP. The default is IPv4 enabled.
Mode
It can choose a static IP or Dynamic IP.
IP
IP address of associate NIC interface.
Netmask/Prefix Length
Input netmask for IPv4 and Prefix length for IPv6.
