Teleport Integration Unit. Configuration Manual
60
#TLP1_IP=[0.0.0.0]
IP address of device 1
#TLP1_GATE=[0.0.0.0]
Not used
#TLP1_MASK=[0.0.0.0]
Not used
#TLP_NET_MODE=[0]
Not used
#MODBUS_STATE=[1]
State of the Modbus protocol
#MODBUS_ID=[0]
Not used
#MODBUS_MODE=[2]
Operating mode: only 2-Modbus TCP
5.3.21
Reset to factory settings
Reboot/Default → Factory Default
Figure 5.3.21.1 Restoring default
settings
If necessary, it is possible to reset the settings to the factory settings. The
resetting can be selective:
Keep current Network settings
— Reset all settings, but keep current
network settings: IP, MAC, Gateway, Mask
Keep current username & password
— Reset all settings, but keep
current access settings: Username, Password
5.3.22
Reboot
Reboot/Default → Reboot
If necessary, Teleport can be remotely rebooted.
Reboot CPU
– Rebooting the processor only.
Reboot All
– Complete reboot (processor, switching part)
Figure 5.3.22.1 Reboot
