TFortis Teleport-1 Configuration Manual Download Page 14

Page: 14 / 86

Teleport Integration Unit. Configuration Manual

3.2 LED indication

Figure 3.1. Teleport-1 indicators

Integration units Teleport-1 and Teleport-2 have LED indication on the front

panel that displays the operating parameters of the device (

) or the state of inputs

and outputs (

RUN

indicator displays the operating mode of the device.

ETHERNET

indicator combines the link indicator and indicator of activity

through the Ethernet port.

RS485

indicator displays activity on the RS485 interface.

The indicators from group

(2)

show the state of the inputs and outputs (if the input

or output is closed, the LED is ON, if open – OFF). These indicators can be useful in the
configuration and setup process.

Table 1.1. Purpose of the indicators

Indicator status

Device status

RUN

indicator flashing

(4 seconds interval)

The device operates with the factory settings.

RUN

indicator flashing

(1 second interval)

The device operates normally, the settings are different
from the factory settings

ETHERNET

indicator

continuously ON

The Ethernet interface link is picked up, but there
is no data exchange

ETHERNET

indicator

flashing

Data is exchanged via Ethernet

RS485

indicator

flashing

Data is exchanged via RS485

RUN

and

RS485

indicators flashing in
sync

Hardware or software fault is detected. Contact
technical support.

Summary of Contents for Teleport-1























































































Search results

Summary of Contents for Teleport-1

Reviews:

Related manuals for Teleport-1

Brands by name

Popular brands

TFortis Teleport-1, Configuration Manual

Search results

Summary of Contents for Teleport-1

Reviews:

Related manuals for Teleport-1

Brands by name

Popular brands