Teleport Integration Unit. Configuration Manual
28
5.3.8 Configuring the broadcasting mode
5.3.8.1 Setting the list of remote devices
Teleport Settings → Remote Devices
Figure 5.3.8.1. Adding remote devices
To configure a bundle of devices used to broadcast the state of dry contact
inputs and RS-485 data, first create a list of devices to send data to. Fill in the list of
remote devices only in this tab.
The list stores all the devices a local device can interact with.
To add a new device, fill in the following fields:
Name
— description of the device. This field is optional bit it may
simplify further identification of the device.
Type
– type of remote device
IP Address
— IP address of remote device. Press
Apply
to save the settings.
Press
Edit
to edit the settings of the remote device. To delete the settings, press
Delete
.
Pressing the
Info
button will display detailed information about the
device, connection status, number of inputs and outputs, etc.
