TFortis Teleport-1 Configuration Manual Download Page 44

Page: 44 / 86

Teleport Integration Unit. Configuration Manual

As an example of mail server for Windows, let's see Office Mail Server

(

https://www.box.com/oms

). This is a free program with simple configuration.

Technical support and instructions are available on the website:

http://oficemailserver.livejournal.com/

Install the program. After startup, the main window will be available:

Figure 5.3.15.1.4 Office Mail Server main window

Go to menu

Options->SMTP/POP3 server options

and select

Local domain name:

companyname.com

In the Users field add the user

client.

Then select user type [BOSS].

Office Mail Server support the following types of users:

Postmaster — a user responsible for Office Mail Server operation and
maintenance. This user receives special messages generated by the system
in case of an error.

Daemon – this is used to remotely connect to an external SMTP/POP3
server, send and receive messages

Boss – this is the user who gets copies of all messages sent over the
SMTP server.

Summary of Contents for Teleport-1























































































Search results

Summary of Contents for Teleport-1

Reviews:

Related manuals for Teleport-1

Brands by name

Popular brands

TFortis Teleport-1, Configuration Manual

Search results

Summary of Contents for Teleport-1

Reviews:

Related manuals for Teleport-1

Brands by name

Popular brands