TFortis Teleport-1 Configuration Manual Download Page 16

Page: 16 / 86

Teleport Integration Unit. Configuration Manual

5 Management

5.1 Management Interfaces

TFortis Teleport integration units have the following options of remote

management: Web interface, Telnet, SNMP.

Web interface contains a full set of managed parameters with a detailed

explanation and a short summary. The interface is available in Russian and in English.
You may connect to it via a standard web browser.

Telnet is an alternative way of device configuring using a console application,

such as Microsoft Telnet, PuTTY, Hyper Terminal, etc.

Management by means of SNMP is currently implemented in the test version

and not all commands are supported in full. SNMP is recommended for monitoring
rather that management of the switch.

5.2 What you need to know before connection

Attention!

The device outputs are not designed to switch to powerful load.
Maximum port load is 100mA 250V.

Teleport-2 integration unit includes 24 VDC output to provide power
supply for peripheral devices. Maximum power of the output is 5W.

Summary of Contents for Teleport-1























































































Search results

Summary of Contents for Teleport-1

Reviews:

Related manuals for Teleport-1

Brands by name

Popular brands

TFortis Teleport-1, Configuration Manual

Search results

Summary of Contents for Teleport-1

Reviews:

Related manuals for Teleport-1

Brands by name

Popular brands