Teleport Integration Unit. Configuration Manual
62
Note:
if login / password were entered incorrectly 30 times in a row, access to
Telnet is blocked for 1 hour.
The
#
symbol and the device name indicate that the authentication was successful
and the integration unit went into configuration mode. (Access rights –
Admin
)
If you have entered the login / password for an account with limited rights, you will
enter the viewing mode. (Access rights –
User
)
The list of commands can be obtained using the command "?" or "help"
The following designations are used as command arguments:
<IP> – IP address in
XX.XX.XX.XX
format
<STATE> – state, either
enable
or
disable
<VALUE> – any signed or unsigned integer
<STRING> – text line
<LIST> – list in the following form:
begin element-end element
Example:
For outputs 1, 2, 3:
"1-3"
; only for port 2: «
2
»
Setting process
via Telnet includes several steps:
1.
Using the subset of commands from the
config
group, the required
configuration is set.
2.
This configuration is saved into memory with the
save command, after
which the settings are applied
Attention:
If after setting the parameters the device is rebooted without using the
save
command, the settings will not be saved.
