Product part no. 830049 Advantage
DC
Dual Zone Fire Control Panel
Manual part no 650.830049 rev. June 13, 2022
The Advantage App when downloaded to your smartphone will look like this and opens like any
other App.
Once the App is installed, connect the Bluetooth Comm module to the programming port of the
Advantage
DC
panel. Press the Push to Enable button on the module. A Blue LED will illuminate
indicating the Bluetooth Comm module is ready to communicate. Press and hold the System
Reset and Alarm Silence buttons simultaneously on the Advantage control panel. Hold for 3
seconds. The Advantage panel will beep 2x indicating Programming Mode has been enabled
and is now able to communicate with your SmartDevice.
Figure 109 - SmartDevice Screenshot
Figure 11 - Bluetooth interface plugged into control
panel with Bluetooth enabled
