6
HYDRO
MIDSIZE
Before using machine for the first time, check
engine and hydraulic fluid levels and lubricate all
points.
TRAINING
a)
Read the operator’s manual carefully. All rotary
grass cutters are potentially dangerous. No person
should operate the machine unless they are familiar
with the controls and the proper use of the machine.
b)
Never allow children or people unfamiliar with these
instructions to use the mower. Local regulations
may restrict the age of the operator.
c)
Keep the area of operation clear of all persons,
particularly small children, and pets.
d)
Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
PREPARATION
a)
Do not operate the equipment when barefoot or
wearing open sandals. Always wear substantial
footwear and long trousers.
b)
Thoroughly inspect the area where the equipment is
to be used and remove all objects which may be
thrown by the machine.
c)
Gasoline is highly flammable.
— Store gasoline only in a container specifically de-
signed for gasoline storage in a cool, dry place away
from sparks and open flame.
— When refueling or checking fuel level:
— Stop engine. Allow to cool.
— Refuel outdoors only.
— Do not smoke.
— Use a funnel. Do not overfill. Clean up spills and
move machine away from spills before starting.
— Replace caps tightly.
d)
Replace faulty mufflers.
e)
Before using, always visually inspect to see that the
blades, blade bolts and cutter assembly are not worn
or damaged. Replace worn or damaged blades and
bolts.
f)
On multi-bladed machines, take care as rotating one
blade can cause other blades to rotate.
g)
Disengage the self-propelled mechanism or drive
clutch on units so equipped before starting the
engine (motor).
h)
Never attempt to make adjustments while the engine
(motor) is running.
i)
Never operate the equipment in wet grass. Always be
sure of your footing; keep a firm hold on the handle
and walk; never run.
OPERATION
a)
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
b)
Mow only in daylight or in good artificial light.
c)
Always be sure of your footing on slopes.
d)
Walk, never run.
e)
With walk behind machines, always mow across the
slopes, not up and down.
f)
Exercise extreme caution when changing direction
on slopes.
g)
Do not mow excessively steep slopes.
h)
Use extreme caution when reversing or pulling the
mower towards you. Be sure the area behind is clear.
i)
Stop the blade(s) if the mower has to be tilted for
transportation, when crossing surfaces other than
grass and when transporting the mower to and from
the area to be mowed.
j)
Never operator the mower without proper guards,
plates, grass catcher or other safety protective
devices in place.
k)
Do not change the engine governor settings or
overspeed the engine.
l)
Disengage all blade and drive clutches before start-
ing the engine.
m) Start the engine or switch on the motor carefully
according to instructions and with feet well away
from the blade(s).
n)
Do not start the engine when standing in front of the
discharge chute.
o)
Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
p)
Never pick up or carry a mower while the engine is
running.
q)
Stop the engine, wait for the blades to come to a
complete stop, and disconnect the spark plug wire:
— before clearing blockages or unclogging chute;
— before checking, cleaning or working on the mower;
— after striking a foreign object. Inspect the mower for
damage and make repairs before restarting and
operating the mower;
GENERAL INSTRUCTIONS
Summary of Contents for Bob-Cat
