User Manual for the FLUXMEDICARE® V2 System
-
IFU-FLUXMEDV2 - V.1.0 - 07/2020
Page 55 / 84
In France, it must be taken to an appropriate collection centre for recycling of electrical and electronic
equipment.
To ensure correct treatment of product waste, refer to the usual recycling network, in compliance with local
requirements for electrical equipment.
11.
Electromagnetic compatibility
•
The use of this appliance beside other appliances should be avoided. This could cause a
malfunction. If this use is necessary this appliance, and the others, should be monitored to
ensure they are functioning normally.
•
The use of accessories, transducers and cables other than those specified or supplied, may
cause an increase in electromagnetic emissions or a decrease in the immunity of this
machine and cause inappropriate operation.
•
RF portable communications devices (including peripherals such as antenna cables and
external antennae) should not be used closer than 30 cm (12 inches) from any part of the
APPLIANCE, including cables specified by the manufacturer. Otherwise the performance of
these devices could be affected.
Electromagnetic compatibility (EMC) and electrostatic discharge (ESD) tests have been performed in accordance
with the following standards:
Phenomenon
Standard base used
Result
Radiated emission
CISPR 11 +A1 : 2010
Meets the requirements of
Group 1 Class B
Emission by conduction
CISPR 11 Group 1 Class B
Meets the requirements of
Group 1 Class B
Harmonic current emission
50 Hz
EN/IEC 61000-3-2+A1+A2 : 2009
Meets the requirements of
Class B
Voltage fluctuation
EN/IEC 61000-3-3 : 2013
Meets the requirements
Electrostatic discharges
IEC 61000-4-2 : 2008
Meets the requirements of
Class B
Radiated electrostatic fields
EN 61000-4-2 : 2008
Meets the requirements of
Class B
Fast transient electrical
disturbance/burst
EN/IEC 61000-4-4-3+ A1+A2 : 2010
Meets the requirements of
Class B
Shock wave
IEC 61000-4-5 : 2005
Meets the requirements of
Class B
RF conducted disturbances
EN 61000-4-6 : 2013
Meets the requirements of
Class B
Magnetic field 50 Hz
IEC 61000-4-8 : 2009
Meets the requirements of
Class B
Supply voltage interruption
and dip
EN/IEC 61000-4-11 :2004
Meets the requirements of
Class B