User Manual for the FLUXMEDICARE® V2 System
-
IFU-FLUXMEDV2 - V.1.0 - 07/2020
Page 47 / 84
Diagram 3: Right face of the light source
The right face of the light source (see Diagram 3) is made up of:
•
A optical output with reinforced sheath
•
A storage support for the intermediate unit
•
A legal notices label
4.4.1.
Powering up the source
1.
Connect the light source to the mains electricity.
2.
Turn on the source by pressing the bistable button ON (I)/OFF (O) located
at the rear of the light source.
The display screen comes on.
4.4.2.
Display screen
The display screen is on the front panel. The verification of parameters and the starting of treatment take place
through this interface via the buttons located on the front of the appliance.
The screen displays all the important parameters related to the treatment and the device functions.
4.4.3.
Initialisation
•
During the display of the initialisation screen, the system carries out a
self-diagnosis and configures the source parameters.
•
The software version is specified on the screen when the source starts
up.
Reinforced
sheath
connection
Storage support for
the intermediate
unit