User Manual for the FLUXMEDICARE® V2 System
-
IFU-FLUXMEDV2 - V.1.0 - 07/2020
Page 46 / 84
4.4.
Use of the light source
Diagram 2: Front face of the light source
The front face of the light source (see Diagram 1) is made up of:
•
A display screen (user interface)
•
A “START/PAUSE” button
•
A “STOP” button, a connection for the reinforce
d cable which connects the source to the intermediate
unit
•
A blue indicator light when the textile is illuminated (ON/OFF)
•
A red indicator light which comes if there is a stoppage in the case of an irradiance problem or when the
optical connector is disconnected.
Diagram 2: Rear face of the light source
The rear face of the light source (see Diagram 2) is made up of:
•
A connector for the power supply cable
•
A start button for the source
•
A legal notices label
•
A housing for fuses
Display screen
Start/Pause
touch button
STOP touch
button
“Treatment in progress” indicator light (blue)
Error warning
light (red)
Start button
(ON/OFF)
Power supply
cable
Source support
feet
Housing
for
fuses